Viton® Gaskets


You are Here:

Viton® made using fluorocarbon materials is used as O-rings as the material has high level of resistance against extreme temperature, oil and chemicals. It is used in chemical processing and automotive.
Viton is often considered a fix all solution to problem elastomer applications. While this may be an exageration it is true that due to it's wide chemical compatibility Viton ® solves many gasket problems. Fuel service is one of those gasket applications where Nitrle (Buna-N) use to be fine, but due to the additives in todays fuels, Viton® is now the solution.

Viton® Gasket

Gaskets, flat seals, door seals, Industrial applications. Standards are in stock or custom manufactured to your specifications. Viton® is a high tech. elastomer designed for extreme heat, oil and chemical resistance. Viton® resists aliphalactic aromatic and halogenated hydrocarbons, concentrated acids, alkalis, animal and vegetable oils. Restrictions: Viton® is not generally resistant to ketones, low molecular weight esters (such as ethyl acetate), or nitro containing compounds. products are not usually serviceable below - 15 degrees F. Specifications: Temperature Limit: 350 F (constant) 400 F (intermittent) Pressure Limit: 800 lbs. @ 400 F Durometer Hardness: 72 Shore A, Tensile Strength: 1285 psi, Elongation: 286% Specific Gravity: 1.88, Finish: Matte, Press Cured Viton® Gaskets cut to your dimensions from Viton® FKM gasket materials.